JJ Iron Works Corp.   
   
Home
Style
Special Offer
Contact Us
Gates
Door
ACCESS CONTROL SYSTEMS
Designs
Sliding Door
security bar
railing
Truck ramp
 
 
 

All Eagle Operators are UL325 and UL991 Compliant!

Every Eagle Operator ships with the new Diamond Control Board. This board has many unique and advanced features, and they all come standard!

The Eagle-Power Series is a fully functional Battery Back-Up System for a reasonable price!

Standard Commercial Operator Features include:

2 Wire Master Slave connection system, you can even use non-shielded wire.

Two 120 VAC Power Outlets for the users convenience.

Heavy Duty Gearbox for efficiency and quiet running.

One Pass Tailgating feature for safety and security.

Stop-Reverse to enable your one button Transmitter to work as a 3 Push Button Station.

Adjustable Timeer with maximum close time of 60 seconds.

Outputs including 24VDC for MAG Lock, Alarm, and 24VAC auxiliary power.

Accessories can be connected to either the Master or Slave Operator.

Independently adjustable Open and Close Delay for Master Slave Systems.

Power On/Off Switch for easily accessible power disconnect to allow easy installation and service.

 

Eagle Access Control Systems, Inc.

EAGLE-1000

The Eagle-1000 Series is the premiere line of Residential Sliding Gate Operators. The Eagle-1000 comes in both Fail Safe and fail secure models, both are dependable operators ideally suited for all residential applications. Both models are manufactured in the USA with dedication to safety, precision performance, and highly durable construction. The Eagle-1000 handles residential gates up to 22' long and 500 lbs at a speed of 12" per second, and comes with a 5 year warranty. Dimensions : 14" (W) x 16" (D) x 22"(H).

Commercial Gate Operators

 

EAGLE-2000

The Eagle-2000 Series is the premiere line of Heavy Duty Commercial Sliding Gate Operators. The Eagle-2000 combines smooth and quiet operation with the power and durability necessary for all Commercial application. These Operators are manufactured in the USA with dedication to safety, precision perfornamnce, and dependability. For starters there is the Eagle-2000 1/2 HP Operator which comes in both Fail Safe and Fail Secure Models. These models can handle gates up to 45' and 1000 lbs at an opening speed of 12" per second. Also in the 2000 Series are the Eagle-2000-1HP and the Eagle-2000-DM Models. The Eagle-2000-1HP uses two 1/2 HP motors working in parallel and is intended for the most heavy duty gates, capable of handling gates up to 45' and 2000lbs. The Eagle-2000-DM is a Dual Motor Operator which uses one 1/2 HP motor to open the gate, and another to close it. The DM model is intended for high traffic ares with gates up to 45' and 1000lbs. The Eagle-2000 Series Operators are warrantied for 5 years Commercial use, or 7 years Residential use. Dimensions : 17" (W) x 17.5" (D) x 25.5" (H). 

 

EAGLE-100

The Eagl-100 is a specially designed Swing Gate Operator for Residential applications. The Eagle-100 combines smooth and quiet operation with power and durability to make it the ideal operator for any residential application. Every Eagle-200 comes standard with a No-Pinch Arm, and on board 24VDC output for MAG Lock. Eagle uses the latest in technology to provide you with the safest and most efficient Operator for your money. The Eagle-100 can handle gates up to 16' long and 400lbs with an opening speed of 18-20 seconds. Eagle provides a 5 year wrranty for this Operator in residential applications. Dimensions : 17" (W) x 17" (D) x 28" (H).

 

Eagle-200

The Eagle-200 Series is a specially designed line of Heavy Duty Commercial Swing Gate Operators. The models in this series are stong and dependable, ideally suited for Commercial and Industrial aplications. Like all Eagle Operators, this line is manufactured in the USA with special attention to safety, performance, and dependability. The Eagle-200 is a 1/2 HP Model and capable of handling gates up to 20' and 1000lbs with an opening speed of 18-20 seconds. The Eagle-200-1HP Model is intended for heavy duty gates and uses two 1/2 HP motors running in parallel. The Eagle-200-DM Model Gate Operator uses one 1/2 HP motor to open the gate and another to close it, ideal for high traffic Commercial areas. The Eagle-200 Series Operators comes with a 5 year warranty for Commercial applications, which is extended for 7 years if used Residentially. Dimensions : 16" (W) x 22" (D) x 28" (H).


Star I - SINGLE Swing Gate Operator

Features

  •  Microprocessor control board
  • 5 year control board warranty
  • Fused board protection 
  • Manual stainless steel quick-release pin
  • Receiver pre-wired at factory & one transmitter included
  • 16" Stroke self-lubricating Warner actuator
  • On board open/close for easy servicing
  • Externally adjustable limit switches
  • 12 volt D.C. operating voltage
  • Built-it timer to close
  • Free exit loop detector capable, safety edge
  • Easy to follow instruction manual included
  • Battery back-up (battery not included)
  • Push or pull gate to open
  • Right or left hand operation
  • Adjustable current sense safety
  • Solar or A.C. charging available
  • Protected 12 volt DC output for solid state accessories such as radio receiver, photo eye, vehicle detector, etc.
  • Handles gate up to 10 feet long and 250 pounds
  • Options Available

  • Alternate brands of radio receivers and transmitters
  • Wired-in button control stations
  • Wired or wireless keypads, buttons and key switches
  • Intercom Systems
  • Telephone entry systems
  • Safety edges
  • Magnetic vehicle detector for safety and exit
  • Safety photo eyes
  • Mechanical and magnetic locks
  • Control box available powder coated (black standard - other colors available)


STAR II - Dual Swing Gate Operator

Features

  • Microprocessor control board
  • 5 year control board warranty
  • Fused board protection 
  • Manual stainless steel quick-release pin
  • Receiver pre-wired at factory & one transmitter included
  • 16" stroke self-lubricating Warner actuator
  • On board open/close button for easy servicing
  • Externally adjustable limit switches
  • 12 volt D.C. operating voltage
  • Built-it timer to close
  • Free exit loop detector capable, safety edge
  • Easy to follow instruction manual included
  • Battery back-up (battery not included)
  • Push or pull gate to open
  • Right or left hand operation
  • Adjustable current sense safety
  • Solar or AC charging available
  • Protected 12 volt DC output for solid state accessories such as radio receiver, photo eye, vehicle detector, etc.
  • Handles gate up to 10 feet long and 250 pounds (per leaf)

Options Available

  • Alternate brands of radio receivers and transmitters
  • Wired-in button control stations
  • Wired or wireless keypads, buttons and key switches
  • Intercom Systems
  • Telephone entry systems
  • Safety edges
  • Magnetic vehicle detector for safety and exit
  • Safety photo eyes
  • Mechanical and magnetic locks
  • Control box available powder coated (black standard - other colors available)




All Eagle
Operators are
UL325 and
UL991
Compliant!

Eagle Access Control Systems, Inc.
EAGLE-1000
 

 


The Eagle-1000 Series is the premiere line of Residential Sliding Gate Operators. The Eagle-1000 comes in both Fail Safe and fail secure models, both are dependable operators ideally suited for all residential applications. Both models are manufactured in the USA with dedication to safety, precision performance, and highly durable construction. The Eagle-1000 handles residential gates up to 22' long and 500 lbs at a speed of 12" per second, and comes with a 5 year warranty. Dimensions : 14" (W) x 16" (D) x 22"(H).